Parts

Features and Benefits:

• Digital voltmeter with min/max voltage capturing
• 4mm banana jack
• 20 ft power lead
• Tests for bad grounds and continuity
• Supplies power and ground

The Power Probe III Circuit tester (Red) with the ability to supply Power or Ground with an indicator tone and bright-white LED headlamps. Features Digital Voltmeter, Min/Max, Audible Circuit Monitoring, 4mm Standard Banana Jack and Auxiliary Ground for component testing. Works with 12 - 24 VDC Systems.

Includes: Power Probe III (with probe tip and battery cable clip set) and instructional video.

Features and Benefits

• Power Up Components
• Audio Tone
• Voltmeter
• 12 - 24 Volt Range
• 20ft. Jumper Lead Set
• Bad Ground Indicator
• Continuity Tester
• Short Circuit Indicator
• Relay and Component Tester

The 20ft. lead will allow you to test bumper-to-bumper without jumper leads. Audio tone indicates positive with a high pitched tone and negative with a low pitched tone. The audio feature can be disabled when testing relays. The Power Probe III has 2 cool white LEDs that flood the work area with bright light. The housing is sleek and feels great in your hand.

Includes:

Power Probe 3 (with probe tip and battery cable clip set)

20 Foot Extension Lead Cable

Cigarette Lighter Adapter

Instruction Manual

Carrying Case

Features and Benefits:Intelligent Optical Positioning System for Autel Standard Calibration Frame;Includes 6 Hi-res Cameras, Wheel Clamps, Targets, and Power Supply;Complete ADAS Calibration Frame Positioning in as Little as 1 Minute;Do Away with Mechanical Measurements;Significantly Reduce Setup Time and Increase Positioning Accuracy;Ideal for Collision Repair, Glass Replacement, and Repair Shops;Fast, Accurate, and Infinitely Repeatable;Check Alignment Tolerances Prior to Calibration;One-year Limited Warranty;The MaxiSys IA800 Intelligent ADAS Calibration Tool enables frame placement in as little as 1 minute to make your ADAS calibrations faster, more accurate, and endlessly repeatable. This professional Optical Positioning System for the Autel Standard Calibration Frame includes 6 high-resolution cameras, wheel clamps, and targets.

Features and Benefits:

• Portable ADAS Calibration System
• Perform Vehicle LDW Camera Calibrations
• Collapsible Aluminum Calibration Frame
• Includes 2-Line Centering and 5-Line Alignment Lasers
• Includes LDW Targets for Numerous Vehicle Manufacturers

Autel’s MA600 Portable ADAS Calibration system includes a collapsible aluminum calibration frame, 2-line and 5-line centering and aligning lasers, laser-assisted reflectors and Lane Departure Warning (LDW) calibration target set for the calibration of vehicle camera systems. The MA600 is compatible with the MaxiSYS ADAS tablet, or the MaxiSYS MS906BT or higher tablet series when upgraded with ADAS software (purchased separately).

Features and Benefits:

• Use on 7-Spade Equipped Vehicles with Integrated and Aftermarket Brake Controllers
• Quickly troubleshoot electrical circuits and ground condition
• Brake Force Meter displays real-time, brake controller output gain and timing
• Microprocessor controlled; simulates trailer brake loads
• 25 ft. cable allows one-man, in-cab testing of brake controller and all truck-side tow circuits, e.g. tail lights, turn signals, electric brakes, etc.

Includes: Electric Brake Force Meter, 25-ft Cable and Soft, Nylon Carrying Case

The #9107A Electric Brake Force Meter with Dynamic Load Simulation and Circuit Testing is a professional, High-quality tool that allows you to test the electric brake controller output and all tow-lighting functions without a trailer present. The #9107A supersedes the #9107 and includes 2017 updates.

Features and Benefits

• Power Up Components
• Audio Tone
• Voltmeter
• 12 - 24 Volt Range
• 20ft. Jumper Lead Set
• Bad Ground Indicator
• Continuity Tester
• Short Circuit Indicator
• Relay and Component Tester

The 20ft. lead will allow you to test bumper-to-bumper without jumper leads. Audio tone indicates positive with a high pitched tone and negative with a low pitched tone. The audio feature can be disabled when testing relays. The Power Probe III has 2 cool white LEDs that flood the work area with bright light. The housing is sleek and feels great in your hand.

Includes:

Power Probe 3 (with probe tip and battery cable clipset)

20 Foot Extension Lead Cable

Cigarette Lighter Adapter

Instruction Manual

Carrying Case

Power Probe TEK III Test Light and-Voltmeter, Blue

Features & Benefits:

• Large multi-line color LCD screen (60% larger than the PPIII)
• Includes carrying case
• Water and dust resistant with loud indicator tones
• Measure DC, AC, and frequency (HZ)
• Test resistance on live and unloaded circuits
• Fuel injector tester mode

Features and Benefits:

• Read/clear codes for all available systems
• Display live data in text, graph and analog for easy data review
• Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time
• Relearn parking brake pad after replacement?
• Support IMMO functions
• Support forced DPF regeneration and adjusting injectors
• Reset Steering Angle Sensor (SAS)
• Reset service mileage and service intervals
• Support TPMS sensor relearn
• Support battery registration and reset

The MaxiCheck MX808 is a 7” touchscreen Android-OS tablet that features all-systems scan diagnostic software and full service menu functions. Read codes on powertrain, body, chassis & information/communication systems. Aids in robust list of maintenance services including oil light and service resets, steering angle sensor calibration, electronic parking brake pad reset, TPMS registration and battery maintenance.

The MX808 is a 7" all systems/all service tablet.

PCB STROBE

 TARGET FRONT ASSY SVC

Nylon Demount / Demount Head

Euro style air chuck (Closed) - (BRASS)

10 pack of lever boots

Euro Coupling

10 FT AIR HOSE 1/4 NPT ON BOTH ENDS Installation hose (TC to supply)

Inflation Hose